Chapter 6 questions part 10

omegametroi0's version from 2017-10-25 21:50


Question Answer
You have just finished upgrading the 250 W power supply in your desktop comuter to a 450 W power supply. Now the BIOS doesn't recognize one of the hard disk drives in the system during POSTMake sure that the hard disk is connected to the power supply.
You have just finished installing a new SATA hard dis in your computer. Now your SATA DVD drive won't work. What should you do first? (select two)1 make sure that the DVD power cable is connected and 2 make sure that the DVD SATA cable is conneced
Your computer currentl runs Windows 10 professional edtion. YOu want to creat a RAID 10 ARRY using four newly-installed SATA disks. When you go to Disk Management, the option to creat RAID 10 array is not available. What should you do?Install an add-on RAID controller
You have physically installed a new hard disk drive in your computer and configured the disk in the BIOS using the CMOS setup program. YOu try to access the hard disk drive in Windows Explorer, but the drive is not displayed. which utility will you use to solve the problem?Disk management
You have a computer running Windows 10 home and need to access the contents of a flas drive. The flash drive has been formatted with the exFAT file system. you want to read the flash drive on your computer as quickly as possible with the least amount of effort. What should you do?Do nothing. Windows 10 can natively access exFAT file systems
Lately you hear a clicking noise when reading or writing data form the hard disk. What is the most likely cause of the clicking?Failing hard drive
A user report that they are unable to access their Firewire drive after moving the the PC from beneath the desk to the top of the desk. What is the most likely cause of this problem?The Firewire cable is loose
One day whiel trying to start your Windows 10 system, you see the following error displayed: could not read from the selected boot disk. check boot path and disk harware.booth into the recovery environment run the bootrec / rebuildbcd command
After installing a new SSD srive in your system, you determine that TRIM funtionality has not been enabled on the drive by the Windows operation system. You need to manually turn TRIM on. given that the volume on the dive has been assigned a drive letter of E:, which command should you use at the command prompt to do this?fsutil behavior set DisableDeleteNotify 0
You have just finished upragding the power supply in your desktop computer. Now the hard disk will not work. What should you do first?Make sure the power connectors on the hard disk are plugged in all of the way.